A leaf spring that sags, cracks, or no longer matches the load it carries can take a vehicle or machine out of service. Finding a source for a non-standard spring is often harder than the repair itself. Coiling Technologies manufactures custom leaf springs to your drawing, specification, or sample in 5160, 1074/1075, 1095, and other spring steels. That covers single leaves, multi-leaf packs, and one-off redesigns.
Many leaf spring manufacturers focus on replacement parts for pickups and trailers. We work the other way around. We start from your engineering requirements and build the spring your equipment needs, whether that is a prototype set for a new vehicle program or a production run for an existing platform.
Leaf Springs Built to Your Drawing or Redesigned to Your Load
Most leaf spring requests we receive fall into one of three groups:
- Build to print: You have a drawing or specification, and you need a qualified source to manufacture it.
- Replace a discontinued spring: The original supplier is gone, and you have the old spring, a part number, or a worn sample.
- Redesign for a new load: The vehicle or machine now carries more weight, a different attachment, or a new duty cycle, and the existing spring sags, cracks, or bottoms out.
Each path ends in the same place: a custom leaf spring with documented material, hardness, and dimensions, built in our Houston facility under an ISO 9001:2015 certified quality management system.
Spring Steels for Custom Leaf Springs
Material choice sets the toughness, fatigue life, and hardenability of the finished leaf. If your drawing calls out a material standard, such as ASTM A322 or ASTM A304, we build to that requirement. If it does not, our engineers will recommend a grade based on section size, load, and service conditions.
5160 Alloy Steel
5160 is the long-standing choice for heavy-duty leaf springs. Its chromium content improves hardenability, so thicker leaves harden through the section rather than only at the surface. It also improves toughness for springs that absorb shock as well as cyclic load. Learn more about our 5160 steel springs.
1074/1075 Carbon Steel
These plain high carbon steels suit light-duty leaf springs and flat spring components where section sizes are smaller and loads are moderate. See our AISI 1074/1075 springs.
1095 High Carbon Steel
1095 offers high hardness and strength for high-stress flat and leaf springs in thinner sections. See our AISI 1095 springs.
How We Manufacture a Custom Leaf Spring
Keeping production under one roof means the material, heat treatment, and finishing records for every leaf stay in one traceability chain.
- Engineering review: We check your drawing or sample against the load, rate, and space available, and flag anything that affects manufacturability.
- Manufacturing to your drawing: Each leaf is built to the width, thickness, length, and camber your drawing specifies.
- Heat treating: In-house spring heat treating brings each leaf to the hardness your drawing calls out.
- Shot peening: Shot peening puts compressive stress into the surface to extend fatigue life under repeated loading.
- Protective finish: Carbon and alloy spring steels need protection from corrosion, and powder coating is a common choice for leaf springs in outdoor service.
- Inspection: Dimensions, hardness, and load are verified against your requirements before shipment.
What to Send for a Leaf Spring Quote
The more of the following we receive up front, the faster our engineers can review your request:
- Drawing or specification, if one exists
- Material grade or material standard
- Leaf width, thickness, length, and the number of leaves in the pack
- Eye or end configuration, including bushing requirements
- Camber or free arch, plus loaded height
- Rated load, spring rate, or the load the spring must now carry
- Hardness requirement
- Finish or coating requirement
- Quantity
- Photos or a physical sample if you are replacing an existing spring
We supply finished springs only and do not sell flat bar or raw spring steel.

Redesigning a Spring Pack for a New Load
When equipment changes, the original spring often stops matching the job. Added armor, a heavier body, a new attachment, or a tougher duty cycle can overload a leaf spring well before its expected service life. Our engineering services team reviews the existing spring, the new load, and the space available. We then propose changes to leaf count, thickness, material, or hardness to restore ride height and fatigue life, and we build prototypes for testing before production begins.
Where Our Custom Leaf Springs Are Used
- Military and tactical vehicles: Suspension springs built to customer drawings and specifications. See our military springs.
- Heavy trucks, trailers, and specialty vehicles: Spring packs for vehicles with custom bodies or uprated loads, part of our broader vehicle suspension work.
- Mining and off-highway equipment: Springs that carry heavy loads and absorb shock on rough ground. See mining equipment springs.
- Industrial machinery: Flat and leaf springs for equipment that needs a compact, high-load spring.
Start Your Custom Leaf Spring Quote
Send us your drawing, specification, or photos of the existing spring, along with the load it needs to carry. Request A Quote and upload your files, and our engineers will review your leaf spring requirements and follow up with any questions.
Leaf Springs FAQs
Does Coiling Technologies make custom leaf springs?
Yes. Coiling Technologies manufactures custom leaf springs to customer drawings, specifications, and samples, including single leaves, multi-leaf packs, and redesigned springs for new loads.
What steel is best for heavy-duty leaf springs?
5160 alloy steel is the most common choice for heavy-duty leaf springs because its chromium content improves hardenability and toughness in thick sections. Plain carbon steels such as 1074/1075 and 1095 suit lighter-duty and thinner leaves.
Can you build a leaf spring without a drawing?
Yes. Send photos, a part number, or the old spring, along with the vehicle or equipment details and the load it carries. Our engineers use that information to define the specification and build a prototype for approval.
Why are leaf springs shot peened?
Shot peening creates a layer of compressive stress at the surface of the leaf, which resists the formation and growth of fatigue cracks. That extends the service life of springs under repeated loading.
Can you redesign a leaf spring for a heavier load?
Yes. Our engineering team reviews the current spring, the new load, and the available space, then recommends changes to leaf count, thickness, material, or hardness to suit the new duty.
Do you sell spring steel flat bar?
No. Coiling Technologies supplies finished, heat-treated springs built to order and does not sell flat bar or raw spring steel.



