ISO 9001:2015 Certified Spring Manufacturer

Coiling Technologies, Inc. prides itself on being an ISO-certified custom spring manufacturer. We perform audits regularly to maintain our certification and ensure our customers continued quality service. ISO 9001:2015 is the international standard for quality management systems. Certification means our processes for design, production, inspection, and traceability are documented, followed, and audited by an accredited third party. In practice, that is what assures you the spring you receive was built under a controlled, repeatable process rather than to a one-off result.

IST Member

Coiling Technologies is a member of the Institute of Spring Technology. IST is a leading spring research organization, with over 80 years of experience in the field. Everything from material and design testing to manufacturing and supply chain support, IST is dedicated to helping its members provide safe and reliable springs.

SMI Member

The Spring Manufacturers Institute is another organization that has created a large informational network for its members. By being a member of SMI, Coiling Technologies has the privilege of attending SMI’s conventions, conferences, and trade events to meet with fellow spring manufacturers, allowing us to continually add data to our spring manufacturing knowledge bank. 

 Coiling Technologies: Your Trusted ISO Certified Spring Manufacturer

At Coiling Technologies, Inc., our commitment to excellence extends beyond certifications and memberships. By adhering to ISO 9001:2015 standards and actively participating in esteemed organizations like IST and SMI, we continuously enhance our processes and stay at the forefront of industry advancements. Our focus remains on delivering high-quality, reliable springs that meet the unique needs of our clients while maintaining the highest standards of safety and performance.

Need springs manufactured under an ISO 9001:2015 certified quality system? Call us at (713) 894-4000 or fill out our online form to tell us about your spring and receive a quote today!

ISO 9001:2015 Certified Compression Springs from an ISO Certified Spring Manufacturer

 

Certifications and Memberships FAQs

What does ISO 9001:2015 certification actually certify?

ISO 9001:2015 certifies a quality management system, not a part. A registrar audits how Coiling Technologies documents processes, controls its documents and records, calibrates measuring equipment, handles nonconforming material, tracks corrective action, and manages customer requirements. It confirms the company does consistently what it says it does. It says nothing about whether a specific spring meets your drawing. That evidence comes from the inspection and test documentation supplied with the order. An engineer reading a supplier list should treat ISO 9001 as a floor for process discipline and then ask separately for part level evidence.

What does it mean that Coiling Technologies is audited regularly?

Certification under ISO 9001:2015 is not a one time event. The registrar runs surveillance audits between full recertification audits, and the standard also requires the company to run its own internal audit program and management review on a defined schedule. Findings become documented corrective actions with root cause analysis and verification of effectiveness. For a buyer, the practical value is that process changes on the shop floor get captured in controlled documents rather than living in one operator's head, and that a problem found on your order gets handled through a system with a paper trail behind it.

What does membership in the Institute of Spring Technology bring to my parts?

IST is a spring research organization with over 80 years of experience in the field, covering material and design testing through manufacturing and supply chain support, and it exists to help members produce safe and reliable springs. The value to a customer is design side. Spring design that stays inside published fatigue and relaxation data, rather than resting on shop experience alone, is design that holds up when a part cycles for years. Membership gives Coiling Technologies access to that research base when a design pushes material limits on stress, temperature, or cycle life.

What does membership in the Spring Manufacturers Institute bring?

SMI operates a large information network for spring manufacturers, with conventions, conferences, and trade events where members meet counterparts and add to their manufacturing knowledge base. It is an industry association rather than a technical certification, and the benefit is practical rather than documentary. Exposure to how other manufacturers solve coiling, tooling, heat treatment, and finishing problems shortens the path on unusual work. When a customer arrives with a geometry or an alloy that sits outside routine production, that accumulated knowledge is often the difference between quoting the job and declining it.

What quality documentation can I request when I place an order?

Per CTI's published documentation practice, an order can carry material certifications with chemistry and mechanical property data, dimensional inspection reports showing measured values against drawing tolerances, first article inspection documentation, load test data, and traceability from the finished spring back to the incoming raw material. Products are analyzed before production and during it against your specifications. Name the documents you require on the purchase order rather than requesting them after shipment, since first article and traceability records have to be generated as the work runs, not reconstructed afterward.

My specification calls for a certification Coiling Technologies does not hold. How should I handle that?

Say so at the RFQ stage and get a straight answer. Coiling Technologies holds ISO 9001:2015 and is a member of IST and SMI. ISO 9001:2015 is not a substitute for AS9100, ISO 13485, or NADCAP accreditation, and no ISO 9001 registrar audit covers what those programs cover. Where your requirement is a material or process standard a customer specifies, such as an AMS specification, an ASTM material standard, NACE MR0175 and ISO 15156 for sour service, or an API requirement, CTI can build and heat treat to meet it and document the result. Where the requirement is a third party accreditation, it has to come from elsewhere.