A broken spring with no drawing can stop a machine just as surely as a failed motor. The original manufacturer may be out of business, may sit overseas, or may not have kept the specification. Coiling Technologies offers spring reverse engineering for these situations. Send us the spring, and we measure it, document a full specification, build a prototype for your approval, and produce a replacement that fits and performs in your equipment.

Our engineers do more than copy a part. A spring that has spent years in service has often lost free length and load. We pair the measurements from your sample with what you tell us about the application, so the replacement performs like the original spring did when it was new, or better.

Hand holding a metal bracket assembly with two zinc-plated extension springsWhen Customers Ask Us to Reverse Engineer a Spring

Most requests for spring sample matching come from one of these situations:

  • Obsolete part: the original supplier no longer makes the spring, or no longer exists.
  • No drawing on file: the equipment came without documentation, or the drawing was lost.
  • Overseas OEM: replacement parts from the original source are hard to get, and you want a US-based manufacturer to build them.
  • Change of alloy: the spring fails from corrosion or heat, and you want the same geometry in a better-suited material.
  • Changed load or rate: the equipment has been modified, and the spring needs to deliver more or less force than the original.

What to Send With Your Spring Sample

A physical sample and any available dimensional or load data are enough to start. These details help our engineers build an accurate specification:

  • The spring itself: A broken spring helps too, so send all of the pieces.
  • Photos: The spring installed and removed, with a ruler or calipers in view for scale.
  • Known data: Any part number, drawing fragment, dimensions, or load values you have.
  • Material, if known: The original material or the material you want for the replacement.
  • Application details: What the spring does, the operating temperature, the media it is exposed to, and the installed height or position.
  • Quantity: How many replacement springs do you need?

How Spring Reverse Engineering Works

  1. Sample review: our engineers inspect the sample and your application details, and confirm we can build the spring.
  2. Baseline specification: we measure and record wire diameter, outside and inside diameter, free length, total and active coils, pitch, direction of wind, and end configuration. Then we calculate the spring rate and loads for your installed position.
  3. Prototype for approval: we build prototype springs to that specification through our spring prototyping process, so you can confirm fit and function in your equipment.
  4. Production: once you approve the prototype, the documented specification becomes the basis for production runs. Every future order is built to the same numbers.

That last step changes the most for many customers. After reverse engineering, you own a complete specification for a spring that previously existed only as a part in your hand.

Gloved hand holding a coil spring next to a tape measure to take its dimensionsMatching the Original or Improving It

Reverse engineering is also a chance to fix whatever made the original spring fail. Our spring design services team can adjust the replacement while keeping it compatible with your equipment:

  • Alloy upgrade: the same geometry in a material better suited to the environment, such as Monel 400 springs for seawater service or Inconel springs for high temperatures.
  • Rate change: A stiffer or softer spring for equipment that now runs under a different load.
  • Fatigue life: Process changes, such as shot peening or a revised stress level, for springs that crack before their expected service life.

For example, take a plain steel garter spring from naval equipment that corrodes in seawater. It can be matched dimensionally and built in Monel 400, so it fits the existing seal and resists the environment that caused the failure. Learn more about our custom garter springs.

Springs We Reverse Engineer

We work from samples across the full range of spring types we manufacture, including:

All work is performed in Houston under our ISO 9001:2015 certified quality management system, with support from our engineering services team from the first measurement through production.

Send Us the Spring

Have a spring but no drawing? Request A Quote and upload photos of the spring, along with any dimensions, load data, and application details you have. If you have a physical sample, send it with your request or contact our team for shipping details.

Request a Quote Contact Us

Spring Reverse Engineering FAQs

What is spring reverse engineering?

Spring reverse engineering is the process of measuring an existing spring, documenting its dimensions and performance, and creating a specification so a matching replacement can be manufactured. It is used when no drawing exists or the original supplier can no longer provide the part.

Can you reverse engineer a broken or worn spring?

Yes. Send all of the pieces along with photos of the spring installed, if possible. A worn spring has often lost free length and load, so our engineers combine the measurements with your application details to define the specification.

Do I need a drawing to get a replacement spring made?

No. A physical sample and any available dimensional or load data are enough to start. Photos and a description of what the spring does in your equipment help our engineers confirm the specification.

Can the replacement be made in a different material?

Yes. Reverse engineering is a common point to upgrade the alloy, for example to stainless steel or a nickel alloy for better corrosion or heat resistance, while keeping the geometry that fits your equipment.

Do I get a prototype before production?

Yes. Coiling Technologies builds prototype springs from the documented specification so you can confirm fit and function before production begins.

What spring types can you reverse engineer?

Coiling Technologies reverse engineers compression, extension, torsion, garter, leaf, flat, disc, and wave springs, as well as wire forms.