In a check, relief, or regulating valve, the spring decides when the valve opens, how it seats, and whether it holds pressure. A spring that is too weak, too stiff, or wrong for the media turns a good valve into a leaking one. Coiling Technologies manufactures custom valve springs built to your specification, for valve manufacturers, repair shops, and engine builders who need the load to be right the first time.

As a valve spring manufacturer that works only to order, we do not sell catalog springs. Every spring is engineered and built in Houston, from prototype quantities through production, under our ISO 9001:2015 certified quality management system.

Two zinc-plated compression springs on threaded rods with hex nuts and brass washersValve Springs Built to Your Specification

Check Valve Springs

A check valve spring holds the disc or poppet against the seat until upstream pressure overcomes it, then closes the valve when flow reverses. Its load at installed height sets the cracking pressure, so free length, rate, and installed load have to be held to the values on your drawing.

Relief Valve Springs

A relief valve spring sets the pressure at which the valve opens to protect a system. Because set pressure depends directly on spring load, consistency from spring to spring matters as much as the load itself. Relief valve springs are commonly built to tight rate and load tolerances with documented test data.

Regulating and Control Valve Springs

In pressure regulating and lube oil regulating valves, the spring balances against system pressure to hold a set point. These springs need a predictable rate across their working range and resistance to relaxation at operating temperature.

Engine Valve Springs

Engine valve springs close the valve and keep the valve train in contact with the cam. We build custom engine valve springs to customer specifications for performance and specialty applications.

Choosing a Valve Spring Material by Duty

The right material depends on load, temperature, and the media the spring sits in:

  • Load stability under high stress: Chrome silicon springs hold their strength at higher operating temperatures and resist relaxation, while chrome vanadium springs suit duty cycles that include shock or impact loading.
  • High temperature service: Nickel alloys such as Inconel X-750 springs retain load where carbon and alloy steels would relax, as in steam, hot gas, and high temperature process valves.
  • Corrosive media: Stainless steels such as 316 stainless steel springs suit water, chemical, and marine service where carbon steel would corrode.

For a deeper look at stress relaxation and fatigue in valve springs, see our valve spring applications page.

Gloved hands installing a valve spring and retainer in an aluminum engine cylinder headWhat We Need to Quote a Valve Spring

Send your drawing if you have one. If not, these details let our engineers define the spring:

  • Free length
  • Outside and inside diameter limits
  • Wire diameter
  • Installed height and load at installed height
  • Height and load at full lift, or solid height
  • Spring rate, if specified
  • Operating temperature
  • Media the spring is exposed to (oil, water, steam, process gas, fuel)
  • Required cycle life
  • Material or material specification, if required
  • Quantity

If you only have a used spring, send it along with the target loads. A spring pulled from service has usually lost free length and load, so the original performance targets matter more than the worn sample.

High Performance and Automotive Spring Experience

High performance valve springs face the combination of high stress, high cycle counts, and heat that defines demanding automotive work. Coiling Technologies brings experience in high performance automotive springs, including suspension springs for the Corvette ZR1X made with Mubea. For engine builders and automotive aftermarket programs, we build custom high performance valve springs to your specification, from prototype sets through production.

Request a Quote for Custom Valve Springs

Send your drawing or the specs above, along with the valve type and operating conditions. Request A Quote, and our engineers will review your custom valve spring requirements and follow up with any questions.

Request a Quote Contact Us

Custom Valve Springs FAQs

What does a check valve spring do?

A check valve spring holds the valve disc or poppet closed against its seat until upstream pressure overcomes the spring load. It then closes the valve when flow stops or reverses. The spring's load at installed height sets the valve's cracking pressure.

How does a relief valve spring set the opening pressure?

The spring load at installed height balances against system pressure acting on the valve. When pressure exceeds the spring load, the valve opens, so the spring's load and rate tolerances directly control the set pressure.

What material is best for valve springs?

It depends on the duty. Chrome silicon and chrome vanadium are common for high stress service, nickel alloys such as Inconel X-750 suit high temperatures, and stainless steels such as 316 suit corrosive media.

Do you sell stock or catalog valve springs?

No. Coiling Technologies builds every valve spring to order from the customer's drawing or specification, from prototype quantities through production.

Can you make a valve spring from a sample?

Yes. Send the spring along with any target loads you have. Because used springs lose free length and load in service, our engineers combine the sample measurements with your performance requirements to define the replacement.